The Qi1 is the installation version of the Q1 line array loudspeaker. It is acoustically compatible with the standard road version, differing only in cabinet construction and mounting hardware. The Qi1 cabinet is a passive 2-way design that houses 2 x 10" LF drivers and a 1.3" HF compression driver with a toroidal waveshaping device to achieve a 75° x 15° (h x v) dispersion characteristic. The two 10" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control.
The Qi1 cabinet is constructed from marine plywood and has an impact resistant paint finish. The front of the loudspeaker cabinet is covered with a replaceable acoustically transparent foam that is then protected by a rigid metal grill. Four M10 threaded inserts on each side panel of the cabinet enclosure are provided for attaching installation hardware. The cabinet rear panel is fitted with two NL4 connectors wired in parallel. The loudspeaker cabinet is also available in Special Colour (SC) and Weather Resistant (WR) options.
Data
Components 2 x 10" driver / 1.3" compression driver
Max. sound pressure (1m, free field)1 with D6 135 dB SPL
Power handling capacity (RMS / peak 10 ms) 400 / 1600 W
Frequency response (-5 dB) 60 / 1002 Hz - 17 kHz
Nominal dispersion angle (h x v) 75° x 15°3
Cabinets per channel D6 2
Dimensions mm (H x W x D) 308 x 580 x 410
Weight kg 21
Dimensions inch (H x W x D) 12.1 x 22.8 x 16.1
Weight lb 46
1 SPL max peak test signal: pink noise with crest factor 4
2 standard/CUT mode
3 ≥ 400 Hz in dipolar direction