The Q1 is a passive 2-way loudspeaker housing two 10" LF drivers positioned in a dipolar arrangement and a 1.3" HF compression driver fitted to a toroidal waveshaping device. The 75° constant directivity horizontal dispersion pattern is maintained down to 400 Hz, while the vertical HF dispersion of 15° allows the Q1 to be used to construct vertical columns that produce a curved coherent wavefront. The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0° and 14°.
Q1 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15° to 30° dispersion, up to 20 cabinets with a fully user and venue defined vertical profile. The Q1 cabinet is constructed from marine plywood, incorporates a pair of handles and has an impact resistant paint finish. The front of the loudspeaker is protected by a rigid metal grill covered with replaceable acoustically transparent foam, and two EP5 or NL4 connectors wired in parallel are mounted on the rear panel.
Data
Components 2 x 10" driver / 1.3" compression driver
Max. sound pressure (1m, free field)1 with D6 135 dB SPL
Power handling capacity (RMS / peak 10 ms) 400 / 1600 W
Frequency response (-5 dB) 60 / 1002 Hz - 17 kHz
Nominal dispersion angle (h x v) 75° x 15°3
Cabinets per channel D6 2 / 2
Dimensions mm (H x W x D) 308 x 580 x 410
Weight kg 22
Dimensions inch (H x W x D) 12.1 x 22.8 x 16.1
Weight lb 49
1 SPL max peak test signal: pink noise with crest factor 4
2 standard/CUT mode
3 ≥ 400 Hz in dipolar direction