The T10 cabinet is a passive 2-way design that houses 2 x 6.5”drivers, a 1.4" exit HF compression driver and can be either used as a line source or high directivity point source loudspeaker. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill. This is achieved through apertures at the cabinet sides which allow rotation to both the line and point source positions. The T10 provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°. When the loudspeaker is used upright as a point source, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern. The two 6.5” neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional dispersion control even at lower frequencies.
The T10 cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.
System data
Frequency response (–5 dB standard) 68 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 120 Hz - 18 kHz
Max. sound pressure (Line/Arc setup • PS setup, 1 m, free field)
with D6/10D 129 •127 dB
with D20/30D 132 •130 dB
with D80 132 •130 dB
Input level (100 dB SPL /1 m) –13 dBu
Loudspeaker data
Nominal impedance 16 ohms
Power handling capacity (RMS/peak 10 msec) 200 /800 W
Nominal dispersion angle (line source, horizontal) 105°
Nominal dispersion angle (point source, h x v) 90° x 35°
Components 2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network
Connections 2 x NLT4 F/M
optional 2 x EP5 or 2 x NL4