The 18A-SUB is a compact high performance subwoofer for use with the xS-Series and xA-Series loudspeakers. The cabinet houses a long excursion 18" neodymium driver in a bass-reflex design and it can be used stand-alone, stacked or as a base for a mixed ground stack. It can also be combined with 10A and 10AL loudspeakers in vertical flown arrays.
The enclosure is constructed from marine plywood with an impact resistant black paint finish and is Ball Impact Resistant according to DIN 18032-3 for schools and sports halls. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam. The side panels have an integrated rigging system and the rear panel incorporates two NL4 connectors as well as a two pole screw terminal block. The loudspeaker cabinets and most accessories are also available with the Special Colour (SC) option that can be executed in all RAL colours, whilst the Weather Resistant (WR) option provides an IP34 rating, and enables operation of loudspeakers in changing ambient conditions.
System data
Frequency response (–5 dB standard) 37 - 140 Hz
Frequency response (–5 dB 100 Hz mode) 37 - 100 Hz
Max. sound pressure (single cabinet, 1 m, free field)
with D6/10D 129 dB
with 30D/D20 132 dB
with D80 132 dB
Loudspeaker data
Nominal impedance 8 ohms
Power handling capacity (RMS/peak 10 msec) 400/1600 W
Components. 18" driver with neodymium magnet
Connections 2 x NL4
screw terminal block
1 SPL max peak test signal: pink noise with crest factor 4
2 100 Hz mode