The Ti10P loudspeaker is the installation version of the T10 for deployment as a point source loudspeaker. Road and installation versions differ only in the mounting hardware.
The Ti10P cabinet is a passive 2-way design that houses 2 x 6.5"drivers, a 1.4" exit HF compression driver and can be used either in horizontal or vertical orientation. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. The horn can easily be rotated from outside the loudspeaker without tools or removing the front grill.This is achieved through apertures at the cabinet sides which allow rotation to both vertical or horizontal setup. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in horizontal setup to 105°.
When the loudspeaker is used upright, the lens curves the wave front of the line source providing a 90° x 35° dispersion pattern.The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing exceptional directivity control even at lower frequencies.
The Ti10P cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated threads for attaching installation hardware. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.
System data
Frequency response (–5 dB standard) 68 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 120 Hz - 18 kHz
Max. sound pressure (1 m, free field)
with D6/10D 127 dB
with D20/30D 130 dB
with D80 130 dB
Input level (100 dB SPL /1 m) –13 dBu
Loudspeaker data
Nominal impedance 16 ohms
Power handling capacity (RMS/peak 10 msec) 200 /800 W
Nominal dispersion angle (h x v) 105°
Components 2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network
Connections 2 x NL4
