The Ti10L loudspeaker is the installation version of the T10 for deployment as a line array loudspeaker. Road and installation versions differ only in the rigging hardware.
The Ti10L cabinet is a passive 2-way design that houses 2 x 6.5”"drivers and a 1.4" exit HF compression driver. The very compact loudspeaker design is a unique combination of a rotatable waveguide with horn and an acoustic lens. It provides a vertical line source with a 90° horizontal dispersion that is maintained down to approximately 600 Hz, whilst the integrated lens in the front grill widens the HF dispersion in line array mode to 105°.
The two 6.5" neodymium LF drivers are positioned in a dipolar arrangement providing an exceptional directivity control even at lower frequencies.
The Ti10L cabinet is constructed from polyurethane integral hard foam with an impact resistant finish and has integrated line array rigging hardware which, once deployed is fundamentally invisible when viewed from the front. The front of the loudspeaker cabinet is protected by a rigid metal grill backed by an acoustically transparent foam.
System data
Frequency response (–5 dB standard) 68 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 120 Hz - 18 kHz
Max. sound pressure (1 m, free field)
with D6/10D 129 dB
with D20/30D 132 dB
with D80 132 dB
Input level (100 dB SPL /1 m) –13 dBu
Loudspeaker data
Nominal impedance 16 ohms
Power handling capacity (RMS/peak 10 msec) 200 /800 W
Nominal dispersion angle (h) 105°
Components 2 x 6.5" driver with neodymium magnet
1.4" exit compression driver on rotatable waveguide
passive crossover network
Connections 2 x NL4
